BroadPOS Vantiv V1.03.00E (Hotfix) Update and BIN File Refresh

Overview

This article is for resellers who manage PAX terminals through the PAXSTORE. It applies to merchants who process through Worldpay (Vantiv) and use surcharging. If the BIN file is out of date, the terminal can read some credit cards as debit cards. When that happens, SwipeSimple does not apply the surcharge to swiped or keyed transactions.

Note: After you update a PAX terminal to BroadPOS Vantiv V1.03.00E (Hotfix), run Check Update in BroadPOS to download the latest BIN file. The BroadPOS update does not refresh the BIN file on its own.


Before you begin

Requirement Details
BroadPOS version BroadPOS Vantiv V1.03.00E (Hotfix), build 20260824
SwipeSimple Terminal app Version 8.2.0 or later
Processor Worldpay (Vantiv)
Connection The terminal must be online (Wi-Fi or Ethernet) to download the BIN file

Note: Update the SwipeSimple Terminal app to 8.2.0 before you push the new BroadPOS version. Earlier SwipeSimple versions do not support this BroadPOS version.


Update BroadPOS and refresh the BIN file

Complete these steps on each terminal. The merchant or the reseller can complete steps 4 through 8 on the terminal.

  1. In the PAXSTORE, push BroadPOS Vantiv V1.03.00E (Hotfix) to the terminal as a standard update. You do not need to uninstall the current version first.
  2. Wait for the update to finish installing on the terminal.
  3. Confirm that the terminal is connected to the internet.
  4. On the terminal, open BroadPOS.
  5. Tap Func, then tap Settings.
  6. If a password is required, is today’s date in MMDDYYYY format. For example, November 18, 2026 would be 11182026. If it gives "Password Error", try with tomorrow's date (in our example, 11192026)
  7. Tap System Settings, then tap File Update, then Check Update.
  8. Wait for BroadPOS to download and install the latest files. Do not power off the terminal during this step.
  9. Return to the SwipeSimple Terminal app and run a test transaction with surcharging turned on.

Note: Run Check Update after a fresh install of this BroadPOS version as well. The installer can include a BIN file that is older than the latest one available.


Why this step is needed

The BIN file tells the terminal whether a card is credit or debit. Surcharges apply only to credit cards, so the terminal needs a current BIN file to surcharge correctly.

The BroadPOS update installs the BIN file packaged with that version, which may not be the latest. PAX terminals check for a new BIN file once a month. Each terminal checks on a different day, based on the last two digits of its serial number. Check Update gets the latest file right away, so the merchant does not have to wait for the monthly check.

The date shown next to the BIN file in BroadPOS is the date it was installed on the terminal. It is not the date the file was published.


Troubleshooting

What the merchant sees What to do
A swiped or keyed credit card transaction completes without a surcharge Run Check Update in BroadPOS (steps 4 through 7 above), then retry the transaction
The terminal reports that it cannot apply a surcharge to a debit card, but the card is a credit card Run Check Update in BroadPOS, then retry the transaction
Check Update does not complete Confirm the terminal is online, restart the terminal, and run Check Update again
The issue continues after Check Update Contact SwipeSimple Support with the terminal serial number and the transaction time

This issue does not affect merchants who do not use surcharging.

For any questions, reach out to our support team. Have the terminal serial number, the BroadPOS version, and the SwipeSimple Terminal app version ready.

For the full list of supported versions, see Supported BroadPOS and SwipeSimple Terminal versions.

Was this article helpful?
0 out of 0 found this helpful