Please note that each card reader model will require a specific charging stand and they are not interchangeable. Please verify which model of card reader you have before purchasing the accompanying stand.
1. Place your B250 reader into the charging stand with the SwipeSimple icon facing up. Securely fasten the reader by pushing it in firmly until it clicks.
2. Plug the smaller end of the micro USB cord into the underside of the charging stand. Please ensure that the side showing the USB icon is facing the back of the reader. Connect the larger end to a USB port or power source.
Optional: you may wire your micro USB cord accordingly using the wire track on the underside of the charging stand
3. Setup is complete when the LED indicator above the power button on the reader blinks blue (in the process of charging). A full charge may take up to 2 hours. When the reader is fully charged, the LED indicator will be blue.
B350
1. Place the B350 reader into the charging stand with the SwipeSimple logo facing up.
2. Press the reader down firmly into the cradle until you feel and hear it click into place — this confirms it is securely seated and making contact with the charging connector.
3. Connect the stand's USB-C cable to a power source.
4. Setup is complete when the LED indicator blinks red and blue. A full charge typically takes around three hours.